Bi-Pin .100 CtoC

Bi-Pin .100 CtoC

T-1 Bi-Pin Lamps with .100" Center to Center Pins

(Please click on the link below or scroll down the page)

T-1 Bi-Pin

T-1 Bi-Pin Helium Retardant

T-1 Short Bi-Pin

T-1 Short Bi-Pin (EB Type)

T-1 Bi-Pin .100" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
1.5	0.002	0.01	10,000	C-2R	L-3255/BP10
1.5	0.01	0.015	5,000	C-2R	L-7254/BP10
1.5	0.015	0.06	100,000	C-2R	L-7202/BP10
1.5	0.03	0.075	16,000	C-2R	L-7255/BP10
2.5	0.21	0.32	5,000	C-2R	L-7257/BP10
3.0	0.001	0.008	10,000	C-2V	L-7204/BP10
3.0	0.005	0.013	10,000	C-2R	L-7259/BP10
3.0	0.02	0.015	5,000	C-2R	L-3229/BP10
3.0	0.02	0.024	10,000	C-2F	L-7206/BP10
3.0	0.027	0.04	10,000	C-2R	L-3037/BP10
3.0	0.03	0.06	100,000	C-2R	L-7260/BP10
3.0	0.15	0.12	16,000	C-2R	L-7261/BP10
5.0	0.02	0.015	10,000	C-2F	L-7209/BP10
5.0	0.02	0.02	20,000	C-2R	L-3043/BP10
5.0	0.03	0.02	10,000	C-2R	L-7022/BP10
5.0	0.03	0.03	16,000	C-2F	L-7263/BP10
5.0	0.03	0.06	60,000	C-2R	L-7680/BP10
5.0	0.05	0.06	60,000	C-2R	L-7683/BP10
5.0	0.09	0.075	25,000	C-2R	L-7714/BP10
5.0	0.15	0.06	5,000	C-2R	L-7265/BP10
5.0	0.15	0.08	5,000	C-2R	L-7266/BP10
5.0	0.15	0.115	40,000	CC-6	L-7716/BP10
5.0	0.15	0.115	40,000	C-2R	L-7715/BP10
5.0	0.19	0.115	5,000	C-2R	L-919/BP10
5.0	0.2	0.115	5,000	C-2R	L-7267/BP10
5.0	0.22	0.115	5,000	C-2R	L-922/BP10
5.0	0.22	0.125	5,000	C-2R	L-7268/BP10
10.0	0.1	0.027	10,000	C-2F	L-8095/BP10
12.0	0.1	0.03	10,000	C-2F	L-3023/BP10
12.0	0.15	0.06	10,000	C-2F	L-8097/BP10
14.0	0.15	0.04	10,000	C-2F	L-3228/BP10
14.0	0.15	0.065	10,000	C-2F	L-8098/BP10
18.0	0.15	0.026	10,000	C-2F	L-8099/BP10
28.0	0.05	0.02	25,000	CC-2F	L-3091/BP10
28.0	0.15	0.024	4,000	CC-2F	L-7839/BP10

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to top

T-1 Bi-Pin Helium Retardant .100" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.06	60,000	C-2R	L-7270/BP10
5.0	0.05	0.06	40,000	C-2R	L-7271/BP10
5.0	0.09	0.075	16,000	C-2R	L-7272/BP10
5.0	0.15	0.115	16,000	C-2R	L-7274/BP10

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to top

T-1 Short Bi-Pin .100" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.02	10,000	C-2R	L-2022/BP10
5.0	0.03	0.06	60,000	C-2R	L-6802/BP10
5.0	0.05	0.06	25,000	C-2R	L-6832/BP10
5.0	0.09	0.075	25,000	C-2R	L-7132/BP10
5.0	0.15	0.06	5,000	C-2R	L-6152/BP10
5.0	0.15	0.08	5,000	C-2R	L-6212/BP10
5.0	0.15	0.115	40,000	C-2R	L-7152/BP10
5.0	0.19	0.115	5,000	C-2R	L-119/BP10
5.0	0.2	0.115	5,000	C-2R	L-7212/BP10
5.0	0.22	0.115	5,000	C-2R	L-481/BP10
5.0	0.22	0.125	5,000	C-2R	L-8175/BP10
14.0	0.15	0.04	1,000	CC-2F	L-7008/BP10
28.0	0.15	0.024	1,500	CC-2F	L-7009/BP10

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to top

T-1 Short Bi-Pin (EB Type) .100" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.02	10,000	C-2R	L-2022/EB10
5.0	0.03	0.06	60,000	C-2R	L-6802/EB10
5.0	0.05	0.06	25,000	C-2R	L-6832/EB10
5.0	0.15	0.06	5,000	C-2R	L-6152/EB10
5.0	0.09	0.075	25,000	C-2R	L-7132/EB10
5.0	0.15	0.08	5,000	C-2R	L-6212/EB10
5.0	0.15	0.115	40,000	C-2R	L-7152/EB10
5.0	0.19	0.115	5,000	C-2R	L-119/EB10
5.0	0.2	0.115	5,000	C-2R	L-7212/EB10
5.0	0.22	0.115	5,000	C-2R	L-481/EB10
5.0	0.22	0.125	5,000	C-2R	L-8175/EB10
14.0	0.15	0.04	1,000	CC-2F	L-7008/EB10
28.0	0.15	0.024	1,500	CC-2F	L-7009/EB10

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to top

908/273-8998 FAX 908/273-0853 E-mail: sales@lumitroncorp.com