Bi-Pin .050 CtoC

Bi-Pin .050 CtoC

T-1 Bi-Pin Lamps with .050" Center to Center Pins

(Please click on the link below or scroll down the page)

T-1 Bi-Pin

T-1 Bi-Pin Helium Retardant

T-1 Short Bi-Pin

T-1 Bi-Pin (EB Type)

T-1 Bi-Pin .050" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
1.5	0.002	0.01	10,000	C-2R	L-3255
1.5	0.01	0.015	5,000	C-2R	L-7254
1.5	0.015	0.06	100,000	C-2R	L-7202/BP5
1.5	0.03	0.075	16,000	C-2R	L-7255
2.5	0.21	0.32	5,000	C-2R	L-8757
3.0	0.001	0.008	10,000	C-2V	L-7204/BP5
3.0	0.005	0.013	10,000	C-2R	L-7259
3.0	0.02	0.015	5,000	C-2R	L-3229
3.0	0.02	0.024	10,000	C-2F	L-7206/BP5
3.0	0.027	0.04	10,000	C-2R	L-3037/BP5
3.0	0.03	0.06	100,000	C-2R	L-7260
3.0	0.15	0.12	16,000	C-2R	L-7261
5.0	0.02	0.015	10,000	C-2F	L-7209/BP5
5.0	0.02	0.02	20,000	C-2R	L-3043/BP5
5.0	0.03	0.02	10,000	C-2R	L-7022
5.0	0.03	0.03	16,000	C-2F	L-7263
5.0	0.03	0.06	60,000	C-2R	L-7680
5.0	0.05	0.06	60,000	C-2R	L-7683
5.0	0.09	0.075	25,000	C-2R	L-7714
5.0	0.15	0.06	5,000	C-2R	L-7265
5.0	0.15	0.08	5,000	C-2R	L-7266
5.0	0.15	0.115	40,000	C-2R	L-7715
5.0	0.15	0.115	40,000	CC-6	L-7716
5.0	0.19	0.115	5,000	C-2R	L-919
5.0	0.2	0.115	5,000	C-2R	L-7267
5.0	0.22	0.115	5,000	C-2R	L-922
5.0	0.22	0.125	5,000	C-2R	L-7268
10.0	0.1	0.027	10,000	C-2F	L-8095
12.0	0.1	0.03	10,000	C-2F	L-3023/BP5
12.0	0.15	0.06	10,000	C-2F	L-8097
14.0	0.15	0.04	10,000	C-2F	L-3228/BP5
14.0	0.15	0.065	10,000	C-2F	L-8098
18.0	0.15	0.026	10,000	C-2F	L-8099
28.0	0.05	0.02	25,000	CC-2F	L-3091/BP5
28.0	0.15	0.024	4,000	CC-2F	L-7839

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to Top

T-1 Bi-Pin Helium Retardant .050" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.06	60,000	C-2R	L-7270
5.0	0.05	0.06	40,000	C-2R	L-7271
5.0	0.09	0.075	16,000	C-2R	L-7272
5.0	0.15	0.115	16,000	C-2R	L-7274

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to Top

T-1 Short Bi-Pin .050" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.02	10,000	C-2R	L-2022/BP5
5.0	0.03	0.06	60,000	C-2R	L-6802/BP5
5.0	0.05	0.06	25,000	C-2R	L-6832/BP5
5.0	0.09	0.075	25,000	C-2R	L-7132/BP5
5.0	0.15	0.06	5,000	C-2R	L-6152/BP5
5.0	0.15	0.08	5,000	C-2R	L-6212/BP5
5.0	0.15	0.115	40,000	C-2R	L-7152/BP5
5.0	0.19	0.115	5,000	C-2R	L-119/BP5
5.0	0.2	0.115	5,000	C-2R	L-7212/BP5
5.0	0.22	0.115	5,000	C-2R	L-481/BP5
5.0	0.22	0.125	5,000	C-2R	L-8175/BP5
14.0	0.15	0.04	1,000	CC-2F	L-7008/BP5
28.0	0.15	0.024	1,500	CC-2F	L-7009/BP5

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

Back to Top

T-1 Short Bi-Pin (EB Type) .050" Leg Spacing

Drawing dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.03	0.02	10,000	C-2R	L-2022/EB5
5.0	0.03	0.06	60,000	C-2R	L-6802/EB5
5.0	0.05	0.06	25,000	C-2R	L-6832/EB5
5.0	0.15	0.06	5,000	C-2R	L-6152/EB5
5.0	0.09	0.075	25,000	C-2R	L-7132/EB5
5.0	0.15	0.08	5,000	C-2R	L-6212/EB5
5.0	0.15	0.115	40,000	C-2R	L-7152/EB5
5.0	0.19	0.115	5,000	C-2R	L-119/EB5
5.0	0.2	0.115	5,000	C-2R	L-7212/EB5
5.0	0.22	0.115	5,000	C-2R	L-481/EB5
5.0	0.22	0.125	5,000	C-2R	L-8175/EB5
14.0	0.15	0.04	1,000	CC-2F	L-7008/EB5
28.0	0.15	0.024	1,500	CC-2F	L-7009/EB5

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Pins gold plated .00020 min. per MIL-G-45204, unless unfinished nickel pins are specified. For pins tinned per MIL-STD-202, Method 208, add TPL to the part number.

EB-style bi-pin lamps have a molded epoxy base. Because the base diameter is flush with the glass envelope, these lamps can fit in tighter spaces than similar bi-pin lamps with nylon bases.

Back to Top

908/273-8998 FAX 908/273-0853 E-mail: sales@lumitroncorp.com