Home Up Feedback Contents Search Contact Info

Bi-Pin 

Wire Terminal Midget Flange Bi-Pin Midget Groove

T-1&3/4 Bi-Pin and T-1&3/4 Integral Bi-Pin Lamps
bullet
T-1&3/4 Bi-Pin
bullet
T-1&3/4 Integral Bi-Pin (IBP)
bullet
T-1&3/4 Bi-Pin Helium Retardant

T-1&3/4 Bi-Pin

Drawing dimensions in inches (mm).

Design Volts

Average MSCP

Design Amps

Life (Hours)

Filament Type

Lumitron Part Number
2.5 0.220 0.200 500 C-2R L-7968
2.7 0.040 0.060 6,000 C-2R L-7838
3.0 0.003 0.015 10,000 C-6 L-7375
5.0 0.030 0.060 60,000 C-2R L-7360
5.0 0.050 0.060 25,000 C-2R L-7361
5.0 0.150 0.060 5,000 C-2R L-3149
5.0 0.150 0.115 40,000 C-2R L-7362
6.0 0.030 0.040 10,000 C-2V L-7945
6.0 0.600 0.200 1,000 C-2R L-7328
6.3 0.020 0.040 20,000 C-2V L-7380
6.3 0.230 0.075 1,000 C-2R L-7708
6.3 0.400 0.200 20,000 C-2F L-7381
6.3 0.550 0.200 5,000 C-2R L-7349
10.0 0.004 0.014 10,000 C-2F L-7344
10.0 0.080 0.040 5,000 C-2F L-7367
12.0 0.120 0.040 10,000 C-2F L-7371
14.0 0.300 0.080 40,000 C-2F L-7382
14.0 0.500 0.080 1,500 C-2F L-7330
14.0 0.500 0.100 10,000 C-2F L-7373
18.0 0.150 0.040 10,000 C-2F L-7370
28.0 0.150 0.024 4,000 CC-2F L-7034
28.0 0.150 0.040 10,000 C-2F L-7474
28.0 0.300 0.040 7,000 C-2F L-7387
28.0 0.340 0.040 4,000 C-2F L-7327
Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.
Nickel pins are standard. For pins gold plated .00020 min. per MIL-G-45204, add GPL to part number. For pins tinned per MIL-STD-202, Method 208, add TPL to part number.
Back to Top

 

T-1&3/4 Integral Bi-Pin (IBP)

Drawing dimensions in inches (mm).

Design Volts

Average MSCP

Design Amps

Life (Hours)

Filament Type

Lumitron Part Number
5.0 0.030 0.060 60,000 C-2R L-8805/IBP
5.0 0.050 0.060 25,000 C-2R L-2200/IBP
5.0 0.150 0.060 5,000 C-2R L-3151/IBP
5.0 0.150 0.115 40,000 C-2R L-2203/IBP
6.0 0.600 0.200 1,000 C-2R L-1784/IBP
6.3 0.400 0.200 20,000 C-2F L-2181/IBP
6.3 0.550 0.200 5,000 C-2R L-2112/IBP
10.0 0.080 0.040 5,000 C-2F L-2107/IBP
14.0 0.300 0.080 40,000 C-2F L-2182/IBP
14.0 0.500 0.080 1,500 C-2F L-1705/IBP
14.0 0.500 0.100 10,000 C-2F L-2162/IBP
18.0 0.150 0.040 10,000 C-2F L-2102/IBP
28.0 0.150 0.040 10,000 C-2F L-2185/IBP
28.0 0.300 0.040 7,000 C-2F L-2187/IBP
28.0 0.340 0.040 4,000 C-2F L-1764/IBP
28.0 0.600 0.060 5,000 C-2F L-361/IBP
Pins tinned per MIL-STD-202, Method 208. For gold plated .00020 min. per MIL-G-45204 add GPL to part number.
Back to Top

 

T-1&3/4 Bi-Pin Helium Retardant

Drawing dimensions in inches (mm).

Design Volts

Average MSCP

Design Amps

Life (Hours)

Filament Type

Lumitron Part Number
5.0 0.340 0.200 15,000 C-2R L-7339
Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.
Nickel pins are standard. For pins gold plated .00020 min. per MIL-G-45204, add GPL to part number. For pins tinned per MIL-STD-202, Method 208, add TPL to part number.
Back to Top
908/273-8998      FAX 908/273-0853      E-mail: sales@lumitroncorp.com