Wire Terminal

Wire Terminal

T-1&3/4 Wire Terminal

(Click here for T-1&3/4 Wire Terminal Helium Retardant)

Dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
2.5	0.220	0.200	500	C-2R	L-1783
2.7	0.040	0.060	6,000	C-2R	L-1738
3.0	0.003	0.015	10,000	C-6	L-2158
5.0	0.030	0.060	60,000	C-2R	L-8805
5.0	0.050	0.060	25,000	C-2R	L-2200
5.0	0.150	0.060	5,000	C-2R	L-3151
5.0	0.150	0.115	40,000	C-2R	L-2203
6.0	0.030	0.040	10,000	C-2V	L-1730
6.0	0.600	0.200	1,000	C-2R	L-1784
6.3	0.020	0.040	20,000	C-2V	L-2180
6.3	0.230	0.075	1,000	C-2R	L-1739
6.3	0.400	0.200	20,000	C-2F	L-2181
6.3	0.550	0.200	5,000	C-2R	L-2112
10.0	0.004	0.014	10,000	C-2F	L-1869
10.0	0.080	0.040	5,000	C-2F	L-2107
12.0	0.120	0.040	10,000	C-2F	L-2174
14.0	0.300	0.080	40,000	C-2F	L-2182
14.0	0.500	0.080	1,500	C-2F	L-1705
14.0	0.500	0.100	10,000	C-2F	L-2162
18.0	0.150	0.040	10,000	C-2F	L-2102
22.0	0.300	0.040	2,000	C-2F	L-8425
28.0	0.150	0.024	4,000	CC-2F	L-6033
28.0	0.150	0.040	10,000	C-2F	L-2185
28.0	0.300	0.040	7,000	C-2F	L-2187
28.0	0.340	0.040	4,000	C-2F	L-1764
28.0	0.600	0.060	5,000	C-2F	L-361

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Leads tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45204, add GPL to part number.

T-1&3/4 Wire Terminal Helium Retardant

Dimensions in inches (mm).

Design Volts	Average MSCP	Design Amps	Life (Hours)	Filament Type	Lumitron Part Number
5.0	0.340	0.200	15,000	C-2R	L-1428 (1)

(1) MS27569 Unbased

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: an L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an L-715-AS15.

Leads tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45204, add GPL to part number.

Back to Top

908/273-8998 FAX 908/273-0853 E-mail: sales@lumitroncorp.com